You are here: Home > Stone Introduction > Profiling > SD Grinding and Polishing System

Tel: +44 (0)1580 891662

wet

SD Diamond Grinding and Polishing System

Diamond tool system to grind and polish recessed draining boards in granite kitchen tops.

The SD System is now available after careful research and development to offer a simple and effective system that produces an excellent quality finish quickly.

Designed to be used wet on semi automatic and CNC machines, the eight stage system produces superb results that most competitive systems are unable to achieve.

The Eight Stage SD System consists of:

  • Segmented Metal Bond for rapid stock removal.
  • Coarse Electroplated to grind side angle and calibrate draining board surface.
  • Five grades of Resin Bond wheels which produce a fantastic high quality polish to the angle and draining board surface.

Recommended SD System sequence and Working Parameters
STAGE 1 2 3 4 5 6 7 8
TYPE METAL BOND ELECTROPLATED ELECTROPLATED RED RESIN YELLOW RESIN WHITE RESIN BLUE RESIN ORANGE RESIN
GRIT SIZE COARSE 30 120 200 400 1000 2000 10000
FEED RATE (mm/min) 500 500 500-1000 1000-1200 1000-1500 2000-2500 2000-2500 2000-2500
SPINDLE SPEED (rpm) 3500 3500 3500 1000-1500 1000-1500 1000-1500 1000-1500 1000-1500

Available Angles, Fittings and Accessories

SD System is available in sizes - Stage 1 Metal Bond 86mm or 100mm diameters.
Electroplated and Resin grades 100mm diameter in 30° and 45° angles.

SD_Full_System
SD DIAMOND GRINDING &POLISHING SYSTEM
SD_Sink_Cutout
SUNKEN DRAINER GROUND & POLISHED USING DK SYSTEM
silvertuDRESSING BAR
Dressing Bars are used to recalibrate the resin grades (Red -Orange) . More
silvertuFELT PADS and POLISHING COMPOUND
Felt Pads with Polishing Compound can be applied when necessary. More
SD_Grinding_Wheels
METAL BOND, ELECTROPLATED & RESIN BOND WHEELS
multicut30° SD SYSTEM
30° angle system. More
silvertu45° SD SYSTEM
45° angle system. More
multicutTOOL HOLDERS
Magnetic, Snail and Thibaut fitting adaptors are available. Other fittings on request. More

NOTE:
Recessed draining board should be completed before cutting out bowl.
All grades must be used wet.
Resin grades require 2-4 passes depending on hardness of stone.