You are here: Home > Stone Introduction > Polishing Introduction > Rhino Radial Arm Polishing System

Tel: +44 (0)1580 891662

wet

Rhino Radial Arm Polishing System

The Rhino system has been developed for rapid surface grinding and polishing of MARBLE and SLATE faces. The 250mm diameter QRS backed discs quickly and easily achieves the required prepared finish right through to a high gloss finish using standard acid glossier blocks.

The first two grades of metal bond are optional depending on the condition of the marble/slate surface. If these are used stages 1 and 2 can then be missed out. Recommended speed 500 to 800 RPM. Designed to be used wet.

QRS backed converter holder disc available.

Recommended sequence
Metal Bond Metal Bond 1 2 3 4 5
Coarse 40/50 Fine 150/170 GREEN 60 BLACK 120 RED 200 YELLOW 600 †Acid Block

†Conventional acid glossier blocks eg Frankfurt/Munchen seg.

For MARBLE and SLATE ø250mm (QRS)
GRADE CODE
Metal Bond - 40/50 *SMB150
Metal Bond - 150/170 *SMB155
60 *BEPN130A
120 *BEPN130C
200 *BEPN130D
600 *BEPN130E
QRS Backing Disc *BMP035A
Rhino_Radial_Arm_Polishing_System

redress_icon
RADIAL ARM DISCS FOR
RAPID GRINDING AND POLISHING

*Denotes stocked item.
Please state part number when ordering.