You are here: Home > Composites Tooling Range > Composites Cutting > Continuous Rims Saws

Tel: +44 (0)1580 891662

Continuous Rim Saws

For fast straight cutting of materials. Can be used in hand tools or on stationary machines at speeds between 1500 and 3000 surface metres per minute.

OPTIONS: Diameters - 25 - 700mm

Note: Can be supplied in a variety of diamond grades and widths.

Normally saws over 40mm diameter are coated with 3mm down the sides and the larger saws have a deeper coating. Saws are made with bore sizes to suit customers' requirements which should be stated on order.

Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width.

Continuous Rim
DIAMETER (mm) WIDTH (mm) CODE 36/44 CODE 44/60
251.6*ESC005 *ESC010
401.6*ESC025 *ESC030
501.6*ESC045*ESC050
651.6*ESC065*ESC070
701.6*ESC077*ESC089
751.6*ESC085*ESC090
1001.6*ESC135*ESC140
1002.4*ESC145*ESC150
1251.6*ESC165*ESC170
1252.4*ESC175*ESC180
1502.4*ESC205*ESC210
1802.4*ESC255*ESC260
2002.4*ESC285*ESC290
2302.4*ESC305*ESC310
2503.2*ESC335*ESC340
3003.2*ESC355*ESC360
3503.2*ESC375*ESC380
4003.2*ESC405*ESC410
4503.2*ESC425*ESC430
5004.0*ESC455*ESC460
5504.8*ESC475*ESC480
Rim Saws

*Denotes stocked item.
Please state part number when ordering.