You are here: Home > Composites Tooling Range > Composites Drilling > Standard Holesaws

Tel: +44 (0)1580 891662

Electroplated Diamond Standard Holesaws

(Starrett type fitting - Electroplated)

A range of cost effective, diamond holesaws coated in 36/44 diamond grit, that will rapidly cut clean holes in materials including GRP, Glass Reinforced Plastic, Carbon Fibre and Plastic Composites. These diamond dusted hole saws offer long life when dry cutting abrasive composite materials.

OPTIONS:
Diameters - 14 - 152mm
Grade - 36/44

NOTE:
Holesaws furnished without arbors unless specified. Standard drilling depths; with pilot and ejector spring15mm thickness, without pilot and ejector spring 30mm thickness. For customers requiring deeper drilling depth specifically manufactured diamond holesaws can be made to customer requirements. Standard tubes are manufactured with an open tolerance that can vary upto +/– 1mm.

For more information on Core Drills with Starrett type fitting more

Standard Holesaws
Standard Holesaws
DIAMETER (mm) CODE 36/44
14*EDH0096
16*EDH0058
17*EDH1016
19*EDH0034
20*EDH2532
21*EDH1036
22*EDH0078
24*EDH1056
25*EDH0100
27*EDH0116
29*EDH0118
30*EDH0136
32*EDH0114
33*EDH0156
35*EDH0138
37*EDH0176
38*EDH0112
40*EDH0196
41*EDH0158
43*EDH1116
44*EDH0134
46*EDH1136
48*EDH0178
51*EDH0200
52*EDH0216
54*EDH0218
Standard Holesaws
Standard Holesaws
DIAMETER (mm) CODE 36/44
57*EDH0214
59*EDH0256
60*EDH0238
64*EDH0212
65*EDH0296
67*EDH0258
70*EDH0234
73*EDH0278
76*EDH0300
79*EDH0318
83*EDH0314
86*EDH0338
89*EDH0312
92*EDH0358
95*EDH0334
98*EDH0378
102*EDH0400
105*EDH0418
108*EDH0414
111*EDH0438
114*EDH0412
121*EDH0434
127*EDH0500
140 *EDH0512
152*EDH0600

*Denotes stocked item.
Please state part number when ordering.