You are here: Home > Composites Tooling Range > Composites Drilling > Special Holesaws

Tel: +44 (0)1580 891662

Diamond Electroplated Special Holesaws

Automatic Side Ejection Diamond Holesaws - provide a very rapid method of dry cutting holes in GRP/FRP, glass reinforced plastics, carbon fibre, plastic composite mouldings and laminates.

Electroplated Diamond Holesaws Piloted without Spring Operated Core Ejection - for ease of location with core ejecting by means of a spring loaded plunger. HSS/Tungsten Carbide drill or plain pilot available. (No Picture)

Pilot with Spring Core Ejection Electroplated Diamond Holesaw - for under 25mm diameter with ease of location with spring to eject core. HSS/Tungsten Carbide drill or plain pilot available.

Spring Core Ejection without Pilot Electroplated Diamond Holsaws - designed for holesaws under 25mm diameter where limited internal space is available and will not accommodate a standard internal spring plunger ejector. A spring loaded centre is incorporated for location purposes, which ejects the core when the hole is finished.

OPTIONS:
Type
- Automatic Side Ejection
- Piloted with Spring Operated Core Ejection
- Spring Core Ejection with Pilot
Grade - 44/60

NOTE:
Grade 36/44 available, prices on request.
Comes complete with Plain or HSS Pilot Drills.
Tungsten Carbide drills are available on request.

Electroplated Diamond Special Holesaws
DIAMETER (mm) CODE 44/60
12EHS010
16EHS015
19EHS020
22EHS025
25EHS030
30EHS035
32EHS040
40EHS045
45EHS050
50EHS055
57EHS060
65EHS065
70EHS070
75EHS075
82EHS080
90EHS085
95EHS090
100EHS095
108EHS100
115EHS105
120EHS110
125EHS115
133EHS120
140EHS125
145EHS130
150EHS135
Auto_Side Ejection_Diamond_Electroplated_Holesaw
AUTOMATIC SIDE EJECTION
Piloted with Spring Operated Core Ejection
PILOTED WITH SPRING OPERATED CORE EJECTION
Special Holesaws
SPRING CORE EJECTION WITH PILOT

Please state part number and whether Auto or Spring Plunger Ejection is required when ordering.